NATIKA Backup/Front View Camera,IP69K Waterproof Great Night Vision HD and Super Wide Angle Metal OEM Style Reverse Rear View Backup Camera for Cars Pickup Trucks SUVs RVs Vans (Black)
$39.99
Product description
As a burgeoning manufacturer of top-notch OEM&ODM vehicle electronic products, NATIKA aims to serve even the most demanding needs of worldwide clientele.Invariably, we believe that customer experience counts far more than short-term profits, so we make concerted efforts to design, manufacture, and improve our products and services in an innovative and responsible fashion.
NATIKA WD-011 Small Size and OEM Style & Factory Look and the Amazing Wide View Angle, Night Vision and Waterproof Backup Camera.
Useful Wire/Loop Control Design:
Reverse camera WD-011 with 3 small wires/Loops (White,Green and Purple color).
*If you need a rear view camera with hanging mounting installation, please keep the purple wire/loop(hanging mounting is a great design for Sedan, SUV).
*If you need a rear view camera with sitting mounting installation, just cut the purple loop(sitting mounting is a great design for pickup trucks, RVs and VANs)
*If you need the guide line, please keep the green wire/loop; If no need it ,just cut it; If you need a front view camera, please cut the white wire/loop;
*If you need a front view camera without guide line, please cut both white and green wire/loop;If for a side view camera,ONLY can installed on a horizontal surface(under left or right mirror),NOT a round,slant or perpendicular surface:look backward,keep the white wire/loop;look forward,cut the white wire/loop.
What you get:
1 x NATIKA Backup Camera; 1 x 26ft/8M Extension Wire/Cable; 1x 304 Stainless Nut; 1 x Double Tape; 1 x Electrical Tape; 3 x Gaskets; 1 x Panel Remover; 7 x Zip Ties; 1 x User Manual; 1 x Thanks Card; 1 x NATIKA Gift Box
Notes:
*This NATIKA backup camera WD-011 is perfect for REAR,FRONT and SIDE VIEW. Monitor/LCD/Screen/Display/Radio not included.
*If connect this NATIKA car backup camera WD-011 to a FACTORY RADIO, please separately order a suited Harness & Programmer to complete installation, because different RADIO need different Harness & Programmer to work together.
* Mount the camera on the panel and route the wire to inside (DO NOT pinch the wire/cable when route the wire, pinched wire will damage the camera, drill a hole to allow the wire go through if needed).
* Apply electrical tape for the joint of the red power wires and RCA wires, and use zip ties to fasten the wire on your vehicle.
*If your head unit with a reverse triggering wire, normally it is a pink color wire, please find it, and connect it with the extension wire’s triggering wire wel (small short red wire next to the RCA/AV connector).
*If the image on the screen is blurry, flickering/flash or has horizontal or vertical strip, please check all your power and video connections. Possibly use a different ground point(iron part) and wrap power and video plugs with electrical tape to insulate from interference. If it still with blurry, flickering/flash or has horizontal or vertical strip, please order a 12V DC power adapter filter rectifier to solve it, especially need for Dodge VW AUDI BMW Mercedes Benz brands vehicle.
*Before you routing, if there is no image on the screen, other than check the camera, please check display setting as well. You can use other device with RCA connector, such as TV to check if the camera works.
*if you want to adjust the camera view angle, please choose one suitable size gasket/shim(there are 3 different size gaskets/shims for option). And apply silicon to seal it if needed.
*For camera connection: connect the camera’s male plug to female connector of the extension wire/cable, make sure the arrows to align. Also make sure to push the camera’s male plug tightly into the female connector of the extension wire.
Small Size Metal Housing and Mini 4PIN Connector:
NATIKA rear view camera WD-011 with small size:1.06*1.06*0.827 inch and solid materials A grade zinc alloy housing.Smaller 4PIN connector for convenient installation, Ours is 5MM/0.197in,the most of others are 12MM/0.473in. 7MM/0.276in difference!
High Resolution and Great Night Vision:
NATIKA reverse camera WD-011 built-in the latest 1/2.7inches high sensitive CMOS and Digital high-definition image processor, it is maximum Pixels 1280*720, and effective 960*576 pixels at 25 fps,also with grade A 6G All-glass,F1.8 large aperture lens,delivers great sharp and clear image in day and night. The TVL of WD-011 is up to 900TVL. For the different output format, the rear view camera WD-011 output is 600TVL, but it is much more clear than the other brand cameras whose original resolution is 420TVL,480TVL and 520TVL. It support great night vision function,the minimum illumination is 0.01Lux,will give you a clear view at night!
Super Wide View Angle:
NATIKA reverse camera WD-011 built-in a Grade A 6G All-glass and F1.8 large aperture lens, the lens’ horizontal angle is 145 degrees(visible range up to 95%), thanks to the 145° horizontal view field, you’ll be able to see far more than you could in the rear view mirrors alone. It helps you to decrease blind zone accidents very well.
Adjustable View Angle:
NATIKA rear view camera WD-011 with 3pcs different size gaskets/shims,when you need to adjust the view angle,please choose one suitable size gasket.Different mounting height have different view angle,after your installation, please check if the view angle is great,if not good,please choose a suitable size gasket/shim to solve it.
Easy Installation:
1.Find a a flat surface(parallel or perpendicular to ground) for mounting camera,then secure the nuts and bolts in place.
2.Connect the power wire of backup camera to the power of reversing light.
3.Connect the 26ft extension wire of backup camera to the head unit of vehicle.
NOTE:
1).Please test the backup camera before routing 26ft extension wire from back to front.
2).If your head unit without A trigger wire, then no need to use B trigger wire
4.Start the vehicle and gear on reverse to test the camera.
5.Re-install the head unit.
Backup camera with strong waterproof function. It designed with fully sealed glue filling craft, you no need to worry about water, fog or mist inside. Caution: please separately order a suitable harness to complete installation if connect it to a factory radio/screen
Rear view camera with a latest HD 600TVL 1/2.7inch image sensor and horizontal 135 degree super wide viewing angle lens, that’s great for you to check the invisible blind spot clearly and make parking safe and simple
Reverse camera housing is metal,small size and OEM style design(OEM look). Also it is built in multifunctional switching loops function,you can switch it to be front view, also support guide line on/off switching and cut the purple loop to choose a vertical down-ward view from like a tailgate down view(tailgate mounting)
Backup camera can fit most types of DC 12-24V different length vehicles. Such as Cars, Pickup Trucks, SUVs, Vans, RVs, etc. It with great low light performance (low illumination level: 0.01Lux)
Customer satisfaction is our top priority. NATIKA offer 24 months replacement warranty,7 days-24 hours professional customer service and technical support
Specification: NATIKA Backup/Front View Camera,IP69K Waterproof Great Night Vision HD and Super Wide Angle Metal OEM Style Reverse Rear View Backup Camera for Cars Pickup Trucks SUVs RVs Vans (Black)
|
8 reviews for NATIKA Backup/Front View Camera,IP69K Waterproof Great Night Vision HD and Super Wide Angle Metal OEM Style Reverse Rear View Backup Camera for Cars Pickup Trucks SUVs RVs Vans (Black)
Add a review
Related Products
$39.99
M –
Excellent Customer Service and High-Quality Camera: A Satisfying Experience
I purchased a NATIKA Backup/Front View Camera and installed it while waiting for the parts needed to install an aftermarket head unit on my 2008 4Runner. During this time, I decided to test the camera using a TV monitor, but unfortunately, it did not work. I reached out to customer service, and they responded promptly and provided detailed instructions to help diagnose the issue. Despite making some wiring changes and checks as instructed, the camera still didn’t work.Jason from the service team arranged to send a replacement camera, which was extremely helpful. While waiting for the replacement, the parts for my head unit arrived, and I went ahead with the installation. On a whim, I decided to test the camera again with the newly installed head unit—and it worked perfectly. Although I couldn’t pinpoint the issue when using the TV monitor, I was relieved and happy that everything worked out in the end.The camera’s performance, both day and night, is exceptional, delivering clear and reliable quality. It also matches the car well, with an OEM-like design that integrates seamlessly and looks like it came with the vehicle from the factory. Beyond the product, the customer service was truly outstanding. Jason’s prompt and generous support made a significant difference in my experience, turning a frustrating situation into a positive one. Thanks to his help, I now have full confidence in recommending this camera to anyone looking for a dependable product backed by an excellent support team.
Jason –
I like it
So I looked around and ended up buying this one. It was worth the price. Bought this was a 2014 Hyundai SonataMy pictures show my lathing of the yellow vid aux to the trunk. I went via the bottom of the car as it was easier and I didn’t want to take off airbag panels. But removing the lower panels is incredibly easy, though you will need to remove the back seat (YouTube on how to do so for your car if you actually need to), and just followed the wiring, zip tying as I went along.I cut a hole into that wire socket after taking off the back seat and pushed it through. Then removed the panels on the trunk, back up lights, the trim, etc (YouTube is your friend), drilled a hole into the plate light panel and snaked the camera power lead to the one from the front of the car.Picture quality could be better, I don’t have an issue with 720p and actually think it’s fine for most eyes (you don’t need to see the pores of people in the car behind you). BUT it could be clearer, think though that the night vision might actually be messing with the lighting during the day and that’s why.So the wires that come with the camera, you know the ones, the white purple and green ones. People looking and reviews and answers people aren’t really clear, thinking that little info will go a long way. It doesnt and people need to learn to actually say what they do, so I’ll clear that up below.Green: the back up guide lines you see telling you how close to something you are(blue, yellow, red) cut this if you don’t want those.Purple: horizontal or vertical viewing. Leave kf you want horizontal, cut if you want vertical. If you have a sedan or your trunk lifts up, leave it be. Anything else, like a truck that has a latch or the trunk flips open like a door, cut it.White: flips the image. So basically this is a preference. If you leave it alone, looking at the screen in your car when in reverse. It will be like if you were looking straight ahead. Right will be right left will be left. If you cut it, right will be left, left will be right on the screen. I left it as it cause it’s easier.The angle(170°) is actually really nice and let’s you see pretty much everything, which I like.The video I placed was at sunset, and you can see the quality is pretty good. Nothing earth shattering but it’ll do it’s job.I’d like to see how this hold up as people say it dies in a could of months. Though I’ll see how it goes and probably just buy one for a bit more money if that happens. But so far I really like it. Will update in like 5 months
mutatio –
Very nice overall.
Solid performance so far, though mine was a challenging install. I installed as a lip mount on the chrome molding on my trunk. What I thought was a solid placement ended up being a problem as the nut (and possibly the threaded mounting post) from the kit was bumping up against the trunk due to the portion of the trunk underneath the chrome molding being angled (think of it being a triangular shape underneath the molding rather than a square-like shape). The molding wouldn’t sit flush with where the camera was placed. I basically ended up lengthening the hole using the drill bit as a workaround dremel (didn’t want to have to go dig it out). I ended up with an oblong hole that ultimately was functional but created some headaches trying to get things fitted. Thankfully, despite my vehicle being a 2007 Toyota Yaris, the chrome trunk molding had a little outline for where a factory camera might be placed, offering a sense of the angle that the camera should ideally be at when installed to the side of the license plate. I double checked our Subaru’s camera and it also has a slight angle pointing the camera toward the center of the vehicle. That said, having to move the camera away from the trunk resulted in a camera that is basically flush and perhaps just slightly protruding beyond the edge of the chrome molding instead of being more recessed under the lip, which would be ideal.The challenges I had were more an issue with the vehicle, but potential improvements to the product that would’ve helped would be:1) Having the threaded mounting post be more centered from front to back on the base of the camera. Trunk moldings/trim vary and I assume there is some reason for the design, but if the post were centered on the base of the camera, it’s likely that the efforts to move the hole would have been less of an issue. The chrome molding has a horizontal lip underneath, which then angles slight up as a subtle beveled edge (see pics). Having to move the camera away from the vehicle meant that instead of having the front of the camera be mostly in line with the beginning of that beveled edge, the front of the camera ended up significantly overhanging that edge. I ended up using one of the wedges to basically fill that space at the front rather than using it to angle the camera. It’s not a perfect solution, but it should be workable overall.2) Shorter threaded post. This would help with more shallow install locations like mine.3) Flatter nut. Possibly narrower as well. Basically whatever might help minimize the space taken up by the hardware on the back/underside of the camera.Things I like?As advertised, the smaller non-RCA neck on the camera cable means I was able to use one of the original holes in the trunk as the pass thru. It was a hole used for a retaining clip on the molding. Based on the number of bolts and two other retaining clips in the molding, I decided the clip in question was optional (it was also removable from the molding, making things easier). In sum, I didn’t have to drill through the metal of the trunk to get the camera cable wired and attached throughout the trunk lid.The image is very good in low light (see pics), especially compared to the stock 2017 Subaru Forester backup camera. The low light performance is great to have as the primary reason for the camera is due to the tint we have on the vehicle. When in reverse I’ve found the tint is problematic when looking over the shoulder or in the mirror out the back of the vehicle. The reverse lights just don’t provide enough illumination to help when looking through the tint in reverse when it’s dark out. The trade off with this camera is the pronounced fish-eye effect. The Subaru camera looks basically representational of what you see with the naked eye while this one has the extra curvature to the image around the edges.All in all, a very useful and workable product. I’m not sure I’ll install one again on my own given the amount of time it took to troubleshoot everything and get things lined up. I might just pay the local big box chain to do it if I get another CarPlay receiver installed in our other vehicle that doesn’t have a backup camera. That said, given the learning experience with this install, it might make things more feasible with the next one.
Vince Tea –
Very good camera. Picture is clear and looks like oem
Joe Varela –
Works great. Good vision day and night
Marvin Gonzales –
sturdy and looks built to last, video out is ok and clear, and it came with free ambient LED which is a bonus
Stranger in a Strange Land –
I got this camera to retrofit my 2007 Corolla. It worked like a charm and looks great, it has all the looks of a stock camera.Very solidly built, easy to install (you make only one hole in your car, maybe 2 in my case). Image is crispy clear. More than happy with this purchase.
Backer –
It’s showing lower part of parking only I think it’s not enough, and camera adjusting pads while fixing is provided not same as shown in the picture, it’s just a form material and there is no way to cancel the parking guidelines as seller said. and not the same camera as described.